Info & Downloads

Press release (165 KB)

JAEGGI ADC High Density: Maximum performance, small footprint

When developing the JAEGGI ADC High Density, achieving maximum power density was a key priority. These units are therefore ideal for high-power applications such as the cooling of IT systems.

Extremely compact, enormously powerful

Even in dry operation, the extremely compact cube with a minimal footprint offers huge power and thus a high switch point for activating the adiabatic pre-cooling unit, which is attached over the entire height of the cube for maximum performance. All mounted parts and components are integrated into the casing. Even the high-performance, super low noise fans cannot be seen from the outside.

Adiabatic pre-cooling system

Should the dry operation be insufficient, e.g. due to high ambient temperatures or heavy system loads, the start of the adiabatic pre-cooling practically switches on the turbo. With the pre-cooling operation, it is also possible to cool the fluid to below the ambient temperature.

Perfect adjustment, easy bringing-in procedure

The ADC High Density can easily be adapted to very diverse requirements. Various combinations of materials, configurable tube materials and geometries as well as various tube circuitry options and fin spacings predestine the powerful cube to be designed with pinpoint accuracy. An added plus are the ideal dimensions for standard low-loader transport. And with the torsion-resistant construction and the factory-fitted transport lugs, it goes without saying that the units can be easily transported by crane without lifting beam.

Intelligent controller reduces operating costs

The smart Hybrimatic control unit continuously records the amount of water applied, the speed of the fans and the state of the ambient air. The necessary information for this such as the fan speed is read out from Güntner Motor Management GMM via the bus communication. This speed information can alternatively be transmitted using a 0 – 10-volt signal. The Hybrimatic is moreover capable of checking the operating costs during operation. This provides the basis for an integrated cost management function, which continually decides whether applying water or changing the speed represents the more cost-saving and therefore more efficient mode of operation, thus saving money. To this end, the water quantity is constantly recorded in this system.

Efficient humidification system, hygienic operation

In this highly efficient humidification system, the easily replaceable humidification pads are only supplied with the amount of water needed depending on the situation. This minimises water consumption and prevents standing water. In the event of inactivity, the pre-cooling unit is automatically drained. The heat exchanger remains completely dry thanks to the separate pre-cooling unit. As a result, regulations such as the 42nd federal law for the protection against immissions (BImSchV) which is in force in Germany do not apply to the unit. The clever design of the ADC High Density takes into account the recognised technical rules when it comes to the hygienic operation of evaporative cooling systems.

Easy inspections, cleaning and maintenance

The ADC High Density is easy to work on. Thanks to a large lockable inspection door, all internal components can be accessed quickly and easily. This makes all inspection, servicing and maintenance work easier. Talking of service, not only are all spare parts available anywhere in the world, our service staff can assist you if you request this. The service includes all work which is necessary over the entire life cycle – from commissioning to disassembly.

back to overview

Share this page